Table of Contents
Advertisement
FLIGHT MANAGEMENT
21) Upon passing PYNON the approach procedure automatically becomes active. The approach may be activated
at any point to proceed directly to the IAF. In this example, the aircraft has progressed through the final
waypoint of the arrival and the flight plan has automatically sequenced to the IAF as the active leg, activating
the approach procedure (see Figure 5-136).
Figure 5-136 Approach is Now Active
Note: To manually activate the approach procedure, perform the following steps:
a) Press the PROC Key.
b) Turn the large FMS Knob to highlight 'ACTIVATE APPROACH' as shown in Figure 5-137.
c) Press the ENT Key to activate the approach.
Figure 5-137 Manually Activate Approach
190-00592-06 Rev. A
Garmin G1000 Pilot's Guide for the Diamond DA40/40F
269
Advertisement
Table of Contents
