Pfd Options - Wind Vector - Garmin G500 Pilot's Manual

1) While viewing the System Setup page of the AUX page group, press the small
MFD knob to activate the cursor. Turn the large MFD knob to highlight the
desired Airspeeds value.
2) Turn the small MFD knob to select the value and press ENT
3) The On/Off setting will now be highlighted.
On or Off and press ENT
3.4.1.3

PFD Options - Wind Vector

When selected, wind vector information is displayed on the PFD to the left of
the HSI. Four styles are available.
1) While viewing the System Setup page of the AUX page group, press the small
MFD knob to activate the cursor. Turn the large MFD knob to highlight the
desired Wind Vector value.
2) Turn the small MFD knob to select the style and press ENT
Style 1
3) When a Wind Vector style is selected, a Wind Vector box with the chosen style
will be displayed to the left of the HSI on the PFD. When OFF is selected, the
Wind Vector box will not be displayed.
3-46
. The next value will be highlighted.
Style 2
Figure 3-71 Wind Vector Style
Garmin G500 Pilot's Guide
.
Turn the small MFD knob to select
.
Style 3 Style 4
190-01102-02 Rev. E