Changing Air Direction; Normal Sounds - Whirlpool Room Air Conditioners for Slider & Casement Windows Use And Care Manual

Toselect t hefanspeed(inCool,FanOnly or Power S aver
modeonly):
Press AUTO, TURBO, HIGH or LOW.
To raise the temperature:
Press the plus button. Display on air conditioner shows the
Temperature control setting. Each time you press or hold the plus
button, the temperature will increase 1° until it reaches 88°F
(31°C).
To lower the temperature:
Press the minus button. Display on air conditioner shows the
Temperature control setting. Each time you press or hold the
minus button, the temperature will decrease 1° until it reaches
66°F (19°C).
To set Timer for a 1- to 24-hour delay before air conditioner
turns on (air conditioner must be Off):
1. Press TIMER. Timer indicator light on air conditioner will
flash. Display on air conditioner will show remaining hours
before air conditioner will turn off.
To set Timer to turn on air conditioner, changing the
previous settings:
1. Turn on air conditioner.
2. Adjust Mode to Cool, Fan Only, or press POWER SAVER.
3. Adjust Fan Speed to Auto, Turbo, High or Low.
4. Adjust temperature between 66°F (19°C) and 88°F (31°C).
5. Wait 3 seconds before turning off air conditioner.
6. Press TIMER. Timer indicator light on air conditioner will
flash. Display on air conditioner will show remaining hours
before air conditioner will turn on.
7. Press the plus or minus button to change delay time (1 to
24 hours).
8. Press TIMER again or wait 10 seconds. Timer indicator light
on air conditioner will remain on. Display on air conditioner
will show current room temperature.
Use levers to adjust louvers for desired airflow.
A. Levers
TIMER
2. Press the plus or minus button to change delay time (1 to
24 hours).
3. Press TIMER again or wait 10 seconds. Timer indicator light
on air conditioner will remain on. Display on air conditioner
will show the current room temperature.
To set Timer to turn on air conditioner, keeping previous
settings:
1. Turn off air conditioner.
2. Press TIMER. Timer indicator light on air conditioner will
flash. Display on air conditioner will show remaining hours
before air conditioner will turn off.
3. Press the plus or minus button to change delay time (1 to
24 hours).
4. Press TIMER again or wait 10 seconds. Timer indicator light
on air conditioner will remain on. Display on air conditioner
will show the current room temperature.
When your air conditioner is operating normally, you may hear
sounds such as:
• Droplets of water hitting the condenser, causing a pinging or
clicking sound. The water droplets help cool the condenser.
• Air movement from the fan.
• Clicks from the thermostat cycle.
• Vibrations or noise due to poor wall or window construction.
• A high-pitched hum or pulsating noise caused by the modern
high-efficiency compressor cycling on and off.
11