Changing Air Direction - Whirlpool AW05CR1SRHUE Use & Care Manual

5. T o turn off Sleep control, press SLEEP again. or wait 8 hours
for the air conditioner to turn off automatically.
NOTE: The air conditioner will return to previous settings after
Sleep control is turned off.
T emperature
Press the up arrow button to raise the temperature. Each time
■
you press or hold the up arrow button, the temperature will go
up 1°F (1°C) until it reaches 90°F (32°C).
Press the down arrow button to lower the temperature. Each
■
time you press or hold the down arrow button, the
temperature will go down 1°F (1°C) until it reaches 64°F
(18°C).
Timer
T o set Timer for a 30-minute to 24-hour delay before air
conditioner is turned off (a ir conditioner must be On):
1. Press TIMER. Timer indicator light on the air conditioner
control panel will flash.
2. Press up or down arrow button to change the delay time from
30 minutes to 24 hours.
3. After 5 seconds, Timer indicato r light on the air conditioner
control panel will remain on.
T o set Timer to turn on air conditioner, keeping previous
settings:
1. Turn off the air conditioner.
2. Press TIMER. Timer indicator light on the air conditioner
control panel will flash.
3. Press up or down arrow button to change the delay time from
30 minutes to 24 hours.
12
4. After 5 seconds, Timer indicator light on the air conditioner
control panel will remain on.
T o set Timer to turn on air conditioner, changing the
previous settings:
1. Turn on air conditioner.
2. Adjust the mode
Fan, RapidCool control or Power Saver.
3. For Cool mode:
Adjust fan speed to High, Med, Low or Auto.
■
Adjust temperature between 64°F and 90°F (18°C and
■
32°C).
4. For Fan mode, adjust fan speed to High, Med or Low.
NOTE: In Fan mode, temperature cannot be set.
5. For
6 th
Med, Low or Auto.
NOTE:When Dry mode is selected,Fan speed connot
6. For Dry mode and
temperature up or down by 4°F (2°C).
7. Turn off air conditioner.
8. Press TIMER. Timer indicator light on the air conditioner
control panel will flash.
9. Press up or down arrow button to change the delay time from
30 minutes to 24 hours.
10. After 5 seconds, Timer indicator light on the air conditioner
control panel will remain on.
T o clear Timer delay program:
NOTE: Air conditioner can be either on or off.
1. Press TIMER once after it has been programmed. Display will
show remaining time.
2. While the display is showing the remaining time, press TIMER
again. Timer indicator light will turn off.
T o see or change the remaining time (in hours):
1. Press TIMER once after it has been programmed. Display will
show remaining time.
2. While the display is showing the remaining time, press the
plus or minus TEMP button to increase or decrease the time.
3. After 5 seconds, the display will show the current room
temperature.

Changing Air Direction

to Sense system control, Cool, Dry,
6 th TM
,
Sense System control, TM adjust fan speed to High,
be adjusted.
6 th Sense TM System control,
adjust