Download Print this page

The Exhaust Vent Control; Changing Air Direction; Cleaning Your Air Conditioner - Whirlpool AR1230XA0 Use & Care Manual

Hide thumbs

Advertisement

Operating
Instructions
Continued
$
The exhaust vent control
The Exhaust Vent Control setting draws stale or
smoky air from the room.
1.
To exhaust
room air:
Set Exhaust Vent Control to OPEN. Set Selector
to desired setting (COOL, HEAT or FAN ONLY).
Set Fan Control to desired fan speed. Set Thermo-
stat Control to desired setting.
2. To circulate
room air:
Set Exhaust Vent Control to CLOSED. Set
Selector to desired setting (COOL, HEAT or FAN
ONLY). Set Fan Control to desired fan speed. Set
Thermostat
Control to desired setting.
NOTE: For maximum performance,
the Exhaust
Vent Control must be in the CLOSED position
when cooling, heating or room air circulation is
desired.
Changing air direction
The air direction cartridges on both sides of the
unit control the direction of the cooled or heated
air. The air direction cartridge may be rotated to
direct the air straight ahead or to the side of the
unit.
The louvers in each air direction cartridge are
operated by a tab. The tab may be used to direct
the air up, down or straight ahead.
Cleaning Your Air Conditioner
Proper use and care of your air conditioner will
help ensure longer life of the unit and lower
operating costs. Follow these instructions
carefully. Call your Whirlpool servicing dealer for
an annual checkup.
Electrical
Shock and Fire Hazard
l
Unplug power cord from receptacle
before cleaning
unit. Failure to do so
could result in electrical
shock or per-
sonal injury.
l
Do not use flammable
fluids, solvents,
abrasive
cleaners,
or strong detergents.
Fire or product
damage could result.
4

Advertisement

loading

  Related Manuals for Whirlpool AR1230XA0