Page 4
Under Preparation before use Before using the air conditioner, be sure to check and preset as the following. Remote Controller (RC) Auto-Restart Function Auto Turbo Mode Turbo mode is used to start or stop fast cooling. powered on...
Safety precautions away bend may be around requirements...
Page 7
Sleep indicator It lights up in sleep mode. Timer indicator It lights up during set time. Turbo indicator It lights up in super mode. Running indicator It lights up when the AC is running. It flashes during defrosting. Emergency button To let the AC run or stop by pressing the button.
Remote controller Remote controller The remote controller transmits signals to the system. ON/OFF BUTTON The appliance will be switched on or Off on pressing this button MODE BUTTON Press this button to select the operation mode. FAN BUTTON Used to select fan speed in sequence auto, high, medium or low.
Page 9
Remote controller How to Insert the Batteries Note: Use 2 LR03 AAA(1.5volt) batteries. Do not use rechargeable batteries. Replace batteries with new ones of the same type when the display becomes dim. Storage and Tips for Using the Remote Controller Note: The remote controller holder is an optional part.
Page 12
Room temperature decrease by 1.5℃ after operate for 3 minutes Around U button...
Page 13
Operating Instructions Note: If you don't set the time in 10 seconds after you press TIMER ON button, the remote controller will exit the TIMER ON mode automatically. A "beep" can be heard. "ON" stops flashing. The TIMER indicator on the indoor unit lights up. Note: the TIMER ON mode has been canceled.
Page 14
Operating Instructions SLEEP mode SLEEP mode SLEEP mode can be set in COOLING HEATING or DRYING operation mode. This function gives you a more comfortable environment for sleep. In SLEEP mode, The appliance will stop operation automatically after operating for 8 hours. Fan speed is automatically set at low speed.
Installation instructions 1. Installing the Mounting Plate Note: The shape of your mounting plate may be different from the one above, but installation method is similar. 2. Drill a Hole for Piping 3. Indoor Unit Piping Installation Note: When installing the pipe at the directions 1,2 or 4, saw the corresponding unloading piece off the indoor unit base.
Page 23
Installation instructions Piping Joints Thermal Insulation: Piping Thermal Insulation: Note: Drain hose is prepared by user. Piping Connection:...
Page 24
Installation instructions 4. Connecting of the Cable Indoor Unit Indoor unit Note: For some models, it is necessary to remove the cabinet to connect to indoor unit terminal. Outdoor Unit Outdoor unit The figures in this manual are based on the external view of a standard model.
Page 37
Hence, it is our advice that you contact Whirlpool when you are ready to discard the product so that we can channelize the appliance and its...
Need help?
Do you have a question about the magicool and is the answer not in the manual?
Questions and answers
How to set timer