Setting The Volume; Setting The 3-Band Pll Tuner - Silvercrest KH 2391 Operation Manual

Operation
[MULT OFF]: CD playback from the CD
compartment cu .
• Turn the "SEL / VOL" control knob
desired function.
BEEP ON / OFF:
[BEEP ON]: A beep is heard through the loudspeak-
ers when the radio is operated.
[BEEP OFF]: No beep is heard when the radio is
operated.
• Turn the "SEL / VOL" control knob
desired function.
SEEK 1 / 2 :
[SEEK 1]: The automatic station search stops at
the first radio station that can be received.
[SEEK 2]: The automatic station search only stops
after the button
9
is released.
• Turn the "SEL / VOL" control knob
desired function.
STEREO / MONO:
Stereo or mono sound playback during radio
reception.
• Press the "SEL / VOL" control knob
[STEREO] appears in the display window
• Turn the "SEL / VOL" control knob
[MONO] appears in the display window
LOCAL / -DX-:
[LOCAL]: Radio stations in the local vicinity with a
strong transmission signal are played back.
[-DX-]: Distant radio stations with a weak trans-
mission signal are also played back.
• Turn the "SEL / VOL" control knob
desired function.
• Press the "SEL / VOL" control knob
Your settings are automatically stored.
After 10 seconds the device automatically changes
to playback mode.
16 GB/IE
KH2391_Content_UK.indd 16
co to set the
co
to set the
6 or the button 7
:
co to set the
co .
9 .
co
again.
9 .
co
to set the
co .

Setting the volume

L
• Increase the volume by turning the "SEL / VOL"
control knob co in a clockwise direction.
• Reduce the volume by turning the "SEL / VOL"
control knob co in an anticlockwise direction.
Mute Function
The mute function enables you to turn off the
loudspeakers.
• Press the button
MU/DIM
muted and [MUTE ON] appears in the display
window 9 .
• Press the button
MU/DIM
continues as before the MUTE function was
activated and [MUTE ON] disappears from the
display window 9 .

Setting the 3-Band PLL Tuner

L
• Press the button
MODE
•
pears in the display window.
You can select 3 x FM frequency bands (FM1, FM2
and FM3), 1 x medium wave frequency band (MW)
and 1 x long wave frequency band (LW). Each fre-
quency band has six presets on which you can
store radio stations.
• Press the button
BAND
•
quency band you wish to receive. In the
display window 9 you will now see the desig-
nation of the frequency band (e.g. [FM2]), the
frequency (e.g. [99.20]) of a radio station that
is being received or the programme ID during
stereo reception and [TP] for traffic information.
Automatic Station Search
In the case of preset playback function SEEK1:
• Press the button
9
for two seconds. The tuner automatically stops
at the first radio station that it receives and
shows the information in the display window
In the case of preset playback function SEEK2:
• Press and hold down the
button 7 in order to approach the
:
desired frequency. After the button has been
bo
. Playback is
bo
again. Playback
cn
until TUNER ap-
bl and select the fre-
6 7
or button
:
9
.
button 6 or
9
05.09.2006 14:49:14 Uhr