Scanner Tab - Kodak i1800 Series Image Processing Manual

Scanner tab

Document Feeder
4-8
The Scanner tab provides the following options.
Feeder Position — select the desired paper source.
• Normal: select when you are scanning a stack of documents of 25
sheets or less. The input elevator is in its highest position.
• 100 Sheets: select when you are scanning a stack of documents
between 100 and 25 sheets.
• 250 Sheets: select when you are scanning a stack of documents
between 250 and 100 sheets.
• 500 Sheets: select when you are scanning a stack of documents
between 500 and 250 sheets.
Automatically start scanning: if selected, the scanner will wait for up
to 10 seconds for documents to be placed in the input elevator before
scanning will begin. In addition, once the input elevator has been
emptied, the scanner will automatically resume scanning when paper is
placed in the input elevator. The scanner will wait the amount of time
specified by the document feeder timeout.
Lightweight paper: improves output stacking when scanning
lightweight paper. When selected, the scanner will increase the gap
between documents in order to allow each document to settle in the
output tray before the next document gets to the output tray.
NOTE: Using this option will decrease overall throughput.
A-61580 November 2007