Scanner Tab - Kodak i780 Manual

Scanner tab

Document Feeder
A-61504 October 2007
The Scanner tab provides the following options.
Feeder Position — select the desired paper source.
• Normal: select when you are scanning a stack of documents of 25
sheets or less. The input elevator is in its highest position.
• 100 Sheets: select when you are scanning a stack of documents
between 100 and 25 sheets.
• 250 Sheets: select when you are scanning a stack of documents
between 250 and 100 sheets.
• 500 Sheets: select when you are scanning a stack of documents
between 500 and 250 sheets.
Automatically start scanning — if selected, the transport and feeder
will automatically start when the scanner is enabled from the host
without touching the Scan button.
Lightweight paper — improves output stacking when scanning
lightweight paper. When selected, the scanner will increase the gap
between documents in order to allow each document to settle in the
output tray before the next document leaves the transport. Using this
option will decrease overall throughput.
4-9