Kodak i1800 Series Image Processing Manual page 59

A-61580 November 2007
• Action when timeout occurs: indicates the action that will be taken
when the document feeder timeout has been reached.
- Stop Scanning: scanning will stop and control will return to the
scanning application (i.e. ends the job).
- Pause Scanning: scanning will stop but the scanning application
will be waiting for additional images (i.e. stops the feeder).
Scanning may be resumed by touching Resume on the
touchscreen. Scanning may be stopped by touching End Job on
the touchscreen or via the scanning application.
• Automatically start scanning: if selected, the scanner will wait for
up to 10 seconds for documents to be placed in the input elevator
before scanning will begin. In addition, once the input elevator has
been emptied, the scanner will automatically resume scanning when
paper is placed in the input elevator. The scanner will wait the
amount of time specified by the document feeder timeout.
• Lightweight paper: improves output stacking when scanning
lightweight paper. When selected, the scanner will increase the gap
between documents in order to allow each document to settle in the
output tray before the next document gets to the output tray.
NOTE: Using this option will decrease overall throughput.
Sheet Counter — enter a value that will be used to assign the
document count for the next document entering the scanner. This is
incremented sequentially by the scanner and is returned in the image
header.
Diagnostics — displays the Diagnostics tab.
3-31