Creating Different Settings For Each Side Of A Document - Kodak i1800 Series Image Processing Manual

Creating different
settings for each side of
a document
3-28
In this example, let's assume you want to configure a two-sided
document stream of business documents that have color on the front of
the document but the rear side is fine in black and white.
1. If you are not already on the Advanced tab:
• Select a Setting Shortcut from the main Kodak Scanner window
that closely describes your desired output.
• Select Settings to display the Image Settings window.
• Select Advanced Image Setup icon on the Image Settings
window to display the Advanced tab.
2. Select Input document is: Two Sided.
3. Turn on the Different settings per side option.
4. Select Images per side: One.
5. Select Done to return to the Image Settings window.
NOTE: You will notice that the Side option now has two entries:
Front and Back.
6. Select Sides: Front.
7. Select Color (24-bit) for the Scan as option on the General tab.
Make any other adjustments to the front side settings on the rest of
the tabs on the Image Settings window.
8. Select Sides: Back.
9. Select Black and White (1-bit) for the Scan as option on the
General tab.
Make any other adjustments to the back side settings on the rest of
the tabs on the Image Settings window.
10. When finished, select Home to return to the main Kodak Scanner
window and then select Save to save your selections to the
shortcut.
NOTE: If you selected any option other than Images per side: One in
Step 4, two Images to Configure options groups would become
available. You can then individually setup the images that will be
produced for each side of the document.
A-61580 November 2007