Creating A New Setting Shortcut - Kodak i1800 Series Image Processing Manual

Creating a new
Setting Shortcut
A-61580 November 2007
Setting Shortcuts are separately named and contain all scanner
settings required to do a certain scanning job. By default, the i1800
Scanner comes with predefined Setting Shortcuts for the most common
scanner tasks. You can use these default Setting Shortcuts or use them
as a template to create your own Setting Shortcut.
You cannot modify the default Setting Shortcuts.
The procedures that follow describe how to configure a customized
Setting Shortcut. Complete descriptions of the options on the main
Kodak Scanner window and tabs are found in the section entitled, "The
main Kodak Scanner window".
From the main Kodak Scanner window:
1. From the main Kodak Scanner window, select a Setting Shortcut
from the list. It is recommended that you select a shortcut that beset
describes the desired image output.
2. Determine if you want to capture an electronic image of the front of
your document, back of your document or both sides of your
document and make the selection from the Input Document is field.
3-45