Scanner Tab - Kodak i4x50 Series Scanner Setup Manual

Scanner tab

28
The Scanner tab provides the following options:
Document Feeder
Paper Source
• Automatic: looks for paper in the ADF first. If there are no
documents in the input elevator, the scanner will scan from the
flatbed. This option is only available if a flatbed is attached.
• ADF: the input elevator is in the highest position. This selection is
recommended when you are scanning 25 sheets or less from the
input elevator.
• Flatbed: scanner will scan from the flatbed. This option is only
available if a flatbed is attached.
Feeder Position
• Normal: the input elevator is in the highest position. This selection is
recommended when you are scanning 25 sheets or less from the
input elevator.
• 100 Sheets: this selection is recommended when you are scanning
between 25 and 100 sheets from the input elevator.
• 250 Sheets: this selection is recommended when you are scanning
between 100 and 250 sheets from the input elevator.
• 500 Sheets: this selection is recommended when you are scanning
between 250 and 500 sheets from the input elevator.
A-61838/ISIS June 2015