Using The Isis Driver; The Main Isis Driver Window - Kodak i1800 Series Image Processing Manual

4 Using the ISIS Driver

The main ISIS Driver
window
A-61580 November 2007
The ISIS Driver is software that communicates with the scanner. This
driver is created and maintained by EMC Captiva and is provided with
the scanner by Kodak. Many scanning applications support ISIS drivers
and this driver can be used to interface with them.
This chapter provides descriptions of the options on the tabs of the
main ISIS Driver window and how to set these options.
See the section entitled, "Starting the Scan Validation Tool" in Chapter 3
to access the main ISIS Driver window.
The main ISIS Driver window provides a set of 12 tabs. You can select
each of these tabs and make any choices necessary to meet your
scanning needs. The buttons on the bottom of the window apply to all
the tabs.
Default  the values on all tabs will be reset to the factory defaults.
Copy  this function is only available when scanning two-sided
documents. The Copy button provides a convenient way to set up the
color, grayscale or black and white image settings on one side and
transfer them to the other. For example, if you highlight and set up
Front Image #1, you can use the Copy button to duplicate those
settings for Back Image #1.
OK  saves the values set on all tabs.
Cancel  closes the window without saving any changes.
4-1