Kodak i1800 Series Image Processing Manual page 66

Device - Image Address
tab
3-38
Image addressing is used for document tracking, batch control and
image management. The Image Address tab allows you to set an
image address starting point. The scanner will increment the image
address based on how you set up the image address rules on this tab.
NOTES:
• This tab is only available when the scanner is in Image Address
mode.
Current value — displays the scanner's current image address. This
value is used by the scanner as the next image address which is
assigned to the next document scanned.
Starting Address — allows you to enter a starting image address
which overrides the Current value. You can enter a value for each
available field, up to the maximum allowed characters for that field. The
number of available fields, the field types, and the number of characters
allowed per field are based on the Template settings for Format and
Field width (see below).
Template
• Format: allows you to select the format of the image address. The
examples below indicate the available fields.
- Fixed: Fixed
- Level 3: Fixed.Level 3.Level 2.Level 1
- Level 2: Fixed.Level 2.Level 1
- Level 1: Fixed.Level 1
- Level 3 Offset: Fixed.Level 3.Level 2
- Level 2 Offset: Fixed.Level 2
A-61580 November 2007