Kodak i1800 Series Image Processing Manual page 96

Patch Detection
A-61580 November 2007
Patch Control allows you to select what patch types to recognize. One
or more patches can be selected at a time.
On — check this box to enable patch recognition.
Image Address Patch Codes — these patch types are used for image
addressing. When the Patch Reader detects a patch, it automatically
assigns a new image address to the new document. This eliminates the
task of trying to determine where one document stops and the next
starts when an operator is viewing electronic images. It provides a
hierarchical document structure and offers an auto-batching
alternative.You can select Level 2, Level 3, Patch T / Transfer Patch -
Level 2 or Patch T / Transfer Patch - Level 3.
The Patch Reader controls document level changes by automatically
sensing a predefined patch code and changing the document level
accordingly.
Patch 2 — assigns a Level 2 to the current document
Patch 3 — assigns a Level 3 to the current document
Patch T/Transfer Patch — assigns a predetermined level to the next
document. Defined by selecting Level 2 or Level 3 in the Definition box.
(Do not use these patches for
production - they are not to spec)
(Do not use these patches for
production - they are not to spec)
(Do not use these patches for
production - they are not to spec)
4-21