Kodak i1800 Series Image Processing Manual page 69

A-61580 November 2007
• Action to take: defines the action to be taken after processing the
last document in the batch.
- Pause Scanning: scanning will stop but the scanning application
will be waiting for additional images (i.e. stops the feeder).
Scanning may be resumed by touching Resume on the
touchscreen. Scanning may be stopped by touching End Job on
the touchscreen or via the scanning application.
- Stop Scanning: scanning will stop and control will return to the
scanning application (i.e. ends the job). Restart the scan session
from the scanning application.
- Continue Scanning and Restart Count: the scanner will
continue to scan and automatically start a new batch by resetting
How Many to Count.
NOTE: You can also end a batch before the How Many To Count is
reached by using the touchscreen on the scanner. This can be
accomplished by setting up a function key via the OCP tab to be
End Batch.
3-41