Advanced Tab - Kodak i1800 Series Image Processing Manual

Advanced tab

A-61580 November 2007
Input document is — select Two Sided, One Sided - Front, or One
Sided - Back depending on what side(s) you want to configure.
NOTE: The Two Sided and One Sided - Back options are only available
for duplex scanner models.
Different settings per side — by default, the settings you select in the
TWAIN Datasource apply to both sides of the image. Turn this option on
if you want you to select different image processing settings for each
side of the document you are scanning. For example, if you want the
front side to be color and the rear side to be black and white, first make
sure that you have selected the Two Sided option of Input document is,
then turn on Different settings per side.
Once you have done this, the Side option on the Image Settings
window will no longer be grayed out and you can select different
settings for each side.
Now that you have turned on Different settings per side, your
selections will apply only to the front side of the document you are
scanning. After you have made your selections for the front side, use
the Side option to select the back side and then make the settings you
want to apply to the back.
NOTE: The Different settings per side option is only available for duplex
scanner models.
3-19