Scanner Tab - Kodak i1400 Series User Manual

Scanner tab

A-61550 May 2007
The Scanner tab provides the following options.
Paper Source
NOTE: Flatbed options are only available if your scanner is equipped
with the Kodak i1400 Series A3 Flatbed Accessory.
• ADF: if you are scanning documents from the input tray.
• Flatbed: if you are scanning documents using the flatbed.
Transport timeout — allows you to set the amount of time the scanner
will wait after the last document enters the transport before the
transport timeout action is taken. You can specify a time delay setting
from 1 to 300 seconds.
Energy Star — allows you to set the amount of time the scanner will
remain inactive before the scanner goes into an idle state. Choices are:
0 to 60 minutes.
Blank image detection — select the image size (KB), below which an
image is determined to be blank. Images with sizes less than the
number you select will not be created. If you use this option, you must
specify a blank image size for each image type (Binary, Gray and
Color) you want to delete. If you do not make an entry in these fields,
all images are kept.
105