Placing A Call On Hold - Siemens OpenScape Voice OpenStage 20 E SIP User Manual

Step by step
Alterts
Visual alerts= No
Yes
Audible alerts= No
Yes
Forwarding Party
Display last
Option = Save & Exit
Hold ?
Reconnect ?
Setting alerts
Use the Call forward alerts menu to enable and disable
visual and audible alerts for call forwarding (not possible
with the Forwarding key).
Select and confirm the option shown.
f
Select and confirm the option shown.
l
Select and confirm "Yes" or "No".
or.
f
Select and confirm the option shown.
l
Select and confirm the option shown.
or.
m
Select and confirm the option shown.
f
Select and confirm "display first" or "display last."
l
Select the option shown and confirm twice.

Placing a call on hold

You can use this function to place an ongoing call on
hold, for instance, to prevent the other party overhear-
ing a conversation with a colleague in the same room.
Prerequisite: You are conducting a call.
f
Select and confirm the option shown.
If you do not retrieve the held call after a defined
time interval, a reminder beep sounds three ti-
mes and a prompt to retrieve the call or discon-
nect appears on the display. The settings for this
can be found on
Retrieving a held call
l
Select and confirm the option shown.
Enhanced phone functions
page 60 and page 61.
59