Enhanced Functions; The Following Features Are Not Supported; Recording Tips; Recording Calls - Siemens OpenScape Voice OpenStage 20 E SIP User Manual

Call recording
Step by step
136

Enhanced functions:

1
1. A conference can be set up or cleared down during
recording.
2. A consultation can be performed during recording.
3. Call transfer is also available during recording.
4. A second call can be accepted during recording.

The following features are not supported:

1. Playing back recordings over the telephone.
2. Deleting recordings over the telephone.
3. Functions for editing recordings over the telephone.

Recording tips

You will receive the following advisories while a call is
being recorded:
• The recording symbol
(permanent)
• Beep (repeated at intervals for you and your call
partner)
• Beep (single at the start of recording for you and
your call partner)
The audible advisory can also be switched off. Please
check with the relevant administrator.

Recording calls

Using voice recording

The recording function can be used in a similar way to a
recorder, for example for recording music. The recorder
can be:
switched on (standby .)
•
• switched off or stopped (~)
• started (/)
• paused (@)
The symbols used here by way of example can be found
on practically any hardware and software recorder.
1. Server-based conference only
|
on the display