Operating the Telephone with the optiPoint display module
Step by Step
112
Press the maximize icon to enlarge the call information
box and obtain more information about the caller.
Press the Clear icon to refuse the waiting call. The caller
hears an appropriate message.
Placing a Call on Hold
Call Control
Mon 07/03/05 11:34AM
Bill Smith
987654321
On Hold
Consult/Transfer
You can use this function to place an active call on hold.
The other party is informed that they are being placed
on hold.
Prerequisite: You are in the middle of a call.
Press the Hold icon to place the call on hold. The Caller
Box now appears further from the Line.
Press the Reconnect icon to reconnect the call. The
Caller Box now appears closer to the Line.
You can place two calls on hold at the same time.
00:24