Announcing The Local Phone Number - Siemens OpenScape Voice OpenStage 20 E SIP User Manual

OpenScape Voice functions
Step by step
114
Two-way Intercom to a saved member number
Prerequisite: The code for Two-way Intercom and the
member number are programmed on a sensor key.
S
Press the programmed sensor key. A connection to the
team member is established immediately and your
speakerphone function will be switched on.
Z
As soon as the connection has been established, you
will hear a confirmation tone and can reach the destina-
tion caller via this caller's speakerphone function.

Announcing the local phone number

You can use this function in order, for example, to iden-
tify the phone number of a phone in a conference room
if it is not indicated on the display.
^
Lift the handset.
j
Enter the code for "Announcing the local phone num-
ber" (see code table
announced.
]
Then hang up.
page 117). The phone number is