Siemens OpenScape Voice OpenStage 20 E SIP User Manual page 67

Step by step
User
Configuration
Incoming calls?
Handling?
Allow call waiting = No
Yes
Option = Save & Exit
Allowing call waiting
z You can also configure this setting via the WEB inter-
face
If the Call waiting (second call) function is deacti-
vated, a caller hears the busy signal if you are al-
ready conducting a call.
Prerequisite: The option was programmed by your ad-
ministrator.
N
Press the key shown.
Select and confirm the option shown.
j
if nec.
Enter and confirm the user password.
Select and confirm the option shown.
Select and confirm the option shown.
f
Select and confirm the option shown.
f
Select and confirm the option shown.
l
Select and confirm the option shown.
l
Select the option shown and confirm twice.
page 145.
Enhanced phone functions
67