Siemens OpenScape Voice OpenStage 20 E SIP User Manual page 62

Enhanced phone functions
Step by step
User
Configuration
Connected calls
Hold and hang-up
Yes
No
Option = Save & Exit
62
Activating/deactivating Hold and hang-up
This function works in the following call scenarios:
• You have placed a call manually on hold and hang up.
• You accepted a second call, and you or the second
participant hang up.
You can use "hold and hang up" to determine whether
you will be prompted immediately or after a defined
time to retrieve the held call.
z You can also configure this setting via the WEB inter-
face
N
Press the key shown.
Select and confirm the option shown.
j
if nec.
Enter and confirm the user password.
Select and confirm the option shown.
Select and confirm the option shown.
f
Select and confirm the option shown.
l
In the context menu select and confirm the option
shown to activate the function or
l
Select and confirm the option shown to deactivate the
function again. The function is always deactivated by
default.
l
Select and confirm the option shown.
page 145.