Automatic Call Recording; Manual Call Recording; Call Recording With Autostart - Siemens OpenScape Voice OpenStage 20 E SIP User Manual

Step by step
Recording on?
Recording off?
]

Automatic call recording

This is the simplest mode. If you have accepted a call or
called a subscriber and the subscriber answers, the call
is recorded automatically. Refer to
which calls this can be.
As soon as the recording starts, you will see the
recording symbol
page 136).
You cannot pause the recording manually in this mode.

Manual call recording

Activating or deactivating call recording when the
telephone is in idle mode.
Prerequisite: Manual mode is selected.
f
Select the option shown in the telephone's context
menu to enable the option.
f
or disable the option.

Call recording with AutoStart

Standby mode is activated in principle in idle mode. You
cannot switch off the recorder. As soon as a call is set
up, call recording starts automatically.
^
Lift the handset.
or
n
Press the key shown.
[
|
The station answers. You hear a beep and the recording
symbol
being recorded (see also
You can pause the recording at any time and continue it
again.
n
or
If you end the call, the AutoStart process is set up again
for the next call.
|
and hear a beep (see also
is shown on the display. The call is now
page 136)
Call recording
page 135 to check
137