Cisco Aironet 1550 Installation Manual page 80

Mounting the Access Point
Tip When installing the 1552C or 1552CU access point using the pole mount kit, the grounding lug and cable
must be attached to the access point before attaching the access point to the mounting bracket.
Attach the grounding lug and cable to the access point. Refer to
Step 3
on page
Figure 2-24
1 Phillips head M4 x10mm screws (supplied
with pole mount kit)
Screw a M8 x16 bolt in the top support bolt hole on each side the access point (see
Step 4
screw the bolt all the way in; leave approximately a 0.25 inch (0.635 cm) space.
Cisco Aironet 1550 Series Outdoor Mesh Access Point Hardware Installation Guide
2-34
2-41. See Figure 2-24.
Attaching Grounding Lug to Grounding Point
Chapter 2
"Grounding the Access Point" section
1 2
2 Grounding lug
Installing the Access Point
Figure 2-22). Do not
OL-24247-01