Installing The Mounting Bracket On A Pole (All Models); Assembling The Pole Clamp Bracket And The Mounting Bracket - Cisco Aironet 1550 Installation Manual

Outdoor mesh access point
Hide thumbs Also See for Aironet 1550:
Table of Contents

Advertisement

Mounting the Access Point

Installing the Mounting Bracket on a Pole (All Models)

When installing an access point on a vertical pole, mast, or a streetlight pole, you should use the optional
Cisco pole mount kit. The kit supports metal, wood, or fiberglass poles from 2 to 16 inches in diameter.

Assembling the Pole Clamp Bracket and the Mounting Bracket

When installing an access point on a pole, mast, or a streetlight, you should use the optional Cisco pole
mount kit. The kit supports metal, wood, or fiberglass poles from 2 to 16 inches in diameter.
The pole mount kit contains several parts that you must assemble prior to mounting on a pole. First you
need to assemble two strap brackets on the pole clamp bracket that are positioned for the pole diameter
you are using to mount the access point.
on the pole clamp bracket.
Figure 2-8
1
To assemble the pole clamp bracket, follow these steps:
Cisco Aironet 1550 Series Outdoor Mesh Access Point Hardware Installation Guide
2-18
Pole Clamp Bracket Adjustment Hole Locations
Pole size indicators
2 to 6 in.
6 to 11 in.
11 to 16 in.
Figure 2-8
illustrates the pole diameter indicators and bolt holes
2
Bolt holes for pole diameters (11 to 16
inches indicated)
Chapter 2
Installing the Access Point
OL-24247-01

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents