Cisco Aironet 1550 Installation Manual page 94

Outdoor mesh access point
Hide thumbs Also See for Aironet 1550:
Table of Contents

Advertisement

Powering the Access Point
Figure 2-35
1
Thread end
Insert the unterminated end of the Ethernet cable into the round end of the liquid-tight adapter (see
Step 5
Figure
Install an RJ-45 connector on the unterminated end of the Ethernet cable using your Ethernet cable
Step 6
installation tool.
To reduce the risk of fire, use only No. 26 AWG or larger telecommunication line cord. Statement 1023
Warning
Carefully insert the RJ-45 cable connector into the Ethernet port opening on the access point, and
Step 7
connect to the internal Ethernet connector (see
Figure 2-36
1
Liquid-tight adapter
2
Ethernet port opening in access point case
Cisco Aironet 1550 Series Outdoor Mesh Access Point Hardware Installation Guide
2-48
liquid-tight Adapter
2-35), and pull several inches of cable through the adapter.
Inserting RJ-45 Connector into the Ethernet Port Opening in Case
Chapter 2
2
Round end
Figure
2-36).
3
RJ-45 connector
4
Shielded outdoor-rated Ethernet (CAT5e or
better) cable
Installing the Access Point
OL-24247-01

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents