Cisco Aironet 1550 Installation Manual page 77

Chapter 2 Installing the Access Point
Tip When installing the 1552C or 1552CU access point in this configuration, you can use only one hole in
the grounding block (see
Attach the grounding lug and cable to the access point. Refer to
Step 6
on page
Figure 2-21
1
Unused
2 Phillips head M4 x10mm screw (supplied
with pole mount kit)
OL-24247-01
Figure 2-21).
2-41.
Attaching Grounding Lug to Grounding Point
Cisco Aironet 1550 Series Outdoor Mesh Access Point Hardware Installation Guide
"Grounding the Access Point" section
1 2 3
3
Grounding lug
Mounting the Access Point
2-31