Cisco Aironet 1550 Installation Manual page 65

Chapter 2 Installing the Access Point
Position the strap brackets on the pole clamp bracket for the pole diameter you are using and secure each
Step 1
strap bracket with two M8 x16 bolts (with lock washers) (see
ft lbs (17.6 to 20.3 Nm).
Figure 2-9
1
2
Screw the M8 nut onto the pole clamp bracket support bolt, and tighten just enough to prevent the bolt
Step 2
from falling off.
Step 3 Go to the
OL-24247-01
Assembled Pole Clamp Bracket and Strap Brackets
M8 x1.25x16 bolts (with lock washers) 3
Pole clamp bracket
"Mounting Bracket Assembly on a Pole" section on page
Cisco Aironet 1550 Series Outdoor Mesh Access Point Hardware Installation Guide
Mounting the Access Point
Figure 2-9). Tighten the bolts to 13 to 15
Strap bracket (shown positioned for 11
to 16 inch diameter pole)
2-20.
2-19