Cisco Aironet 1550 Installation Manual page 75

Chapter 2 Installing the Access Point
Place the clamp bracket on the strand support cable (see
Step 3
that one cable clamp is placed on each side of the support cable. Tighten the two M8 flange nuts to 13
to 15 in. lbs (17.6 to 20.3 Nm). Ensure the cable is mounted to the bottom side of the access point.
Figure 2-19
3
1
2
3
OL-24247-01
Attach the Cable Strand to the Cable Mount Brackets
1
4
5
Strap bracket assemblies
Strand support cable
Fiber or Cable bundle
Cisco Aironet 1550 Series Outdoor Mesh Access Point Hardware Installation Guide
Figure 2-19). On each cable support bolt, ensure
1
2
4 Antenna unit assembly (shown with the Low
Profile Dual-Band 2.4/5 GHz Omni Antenna
Array)
5 F-Connector Adapter (for Cable Modem
models only); sometimes referred to as a
"stringer"
Mounting the Access Point
2-29