Installing The Chassis In A 4-Post Rack; Supplemental Bonding And Grounding Connections - Cisco ASR 9001-S Hardware Installation Manual

Chapter 2 Unpacking and Installing the Chassis

Installing the Chassis in a 4-post Rack

To mount the Cisco ASR 9001 Router chassis in a 4-post open rack, two side brackets must be attached
to the chassis and the rear posts (see
Figure 2-5

Supplemental Bonding and Grounding Connections

Before you power on the router for the first time, we recommend that you connect the central office
ground system or Network Equipment Building System (NEBS) to the threaded supplemental bonding
and grounding receptacles on the router. For more information on supplemental bonding and grounding
cable requirements, see the
page
OL-26701-02
Installing the Cisco ASR 9001 Router Chassis in a 4-Post Rack
"NEBS Supplemental Unit Bonding and Grounding Guidelines" section on
1-20.
Cisco ASR 9001 and Cisco ASR 9001-S Routers Hardware Installation Guide
Supplemental Bonding and Grounding Connections
Figure 2-5).
2-7