Cisco ASR 9001-S Hardware Installation Manual page 65

Chapter 3 Installing Modules and Cables in the Chassis
Plug the AC power cord into the receptacle at the front of the chassis (see
Step 4
Close the cable wrap to secure the AC power cord plug to the power module receptacle.
Step 5
Figure 3-11 Typical AC Power Connections
Plug the other end of the AC power cord into the AC source receptacle.
Step 6
Proceed to the
Step 7
OL-26701-02
"Powering on the Router" section on page
Cisco ASR 9001 and Cisco ASR 9001-S Routers Hardware Installation Guide
Connecting Power to the Router
Figure 3-11).
3-21.
3-19