Rp External Usb Port - Cisco ASR 9001-S Hardware Installation Manual

Chapter 1 Preparing for Installation
•
Figure 1-27
Table 1-6
Pin

RP External USB Port

The Cisco ASR 9001 Router RP card has an external USB Type A slot accessible on the front panel. The
front panel USB slot accepts widely available USB thumb drives. The only restriction on devices you
can plug into the front panel external USB slot is that they need to be USB 2.0 devices. These devices
can be formatted with FAT16, FAT32 or QNX4 file systems.
The mount point /disk1: is reserved for the front panel USB device.
Note Do not connect a USB hub device to the front panel USB port.
OL-26701-02
in J.211 mode:
Green — DTI is operating in normal mode.
–
Amber — DTI is operating in fast mode.
–
SYNC Port Connector
BITS/J.211 Connector Pinout
Signal
1 DTI_P/BITS_RX_P
2 DTI_P/BITS_RX_N
3 —
4 BITS_TX_P*
5 BITS_TX_N*
6 —
7 —
8 —
1 2 3 4 5 6 7 8
Note
Bi-direction for DTI, T1/E1/64K Input
Bi-direction for DTI, T1/E1/64K Input
—
T1/E1/6.321M Output
T1/E1/6.321M Output
—
—
—
Cisco ASR 9001 and Cisco ASR 9001-S Routers Hardware Installation Guide
Cisco ASR 9001 Router Port Connection Guidelines
1-27