Temperature And Humidity Guidelines; Power Connection Guidelines - Cisco ASR 9001-S Hardware Installation Manual

Site Requirement Guidelines
Figure 1-8

Temperature and Humidity Guidelines

The operating and nonoperating environmental site requirements are listed in
normally operates within the ranges listed in
approaching a minimum or maximum parameter, it indicates a potential problem. Maintain normal
operation by anticipating and correcting environmental anomalies before they approach critical values,
by properly planning and preparing your site before you install the router.

Power Connection Guidelines

You can configure the router with either an AC-input or DC-input power subsystem, so the site power
source requirements differ depending on the power subsystem in your router. Ensure all power
connection wiring conforms to the rules and regulations in the National Electrical Code (NEC) as well
as local codes.
Cisco ASR 9001 and Cisco ASR 9001-S Routers Hardware Installation Guide
1-12
ASR 9001 Clearance Requirements for an Enclosed 4-Post Rack Installation
6 Inches
152.0 mm
Rear of chassis
Front of chassis
Table A-3; however, if a temperature measurement is
Chapter 1 Preparing for Installation
6 Inches
152.0 mm
3.25 Inches
82.55 mm
Table A-2. The router
OL-26701-02