Rp Front Panel Indicators - Cisco ASR 9001-S Hardware Installation Manual

Troubleshooting the Route Processor Subsystem

RP Front Panel Indicators

The RP card has eight discrete LED indicators for display of system information.
Table 4-3
normal LED states on the power modules (AC or DC) and the fan tray after a successful system startup.
Table 4-3
Indicator (Label) LED
RSP FAIL Bi-color
LC FAIL Bi-color
Critical Alarm Single color
(CRIT)
Major Alarm (MAJ) Single color
Minor Alarm (MIN) Single color
External USB 2.0 Single color
(EUSB)
Alarm Cutoff (ACO) Single color
Synchronization Bi-color
(SYNC)
FAIL/OK
Bi-color
(Power Module)
Cisco ASR 9001 and Cisco ASR 9001-S Routers Hardware Installation Guide
4-10
lists the display definitions of the eight discrete LEDs on the RP front panel as well as the
RP Discrete LED Display Definitions
Color
Red
Green
Off
Red
Green
Off
Red
Off
(Default after reset)
Red
Off
(Default after reset)
Amber
Off
(Default after reset)
Green
Off
(Default after reset)
Amber
Off
(Default after reset)
Green
Amber
Off
(Default after reset)
Green
Amber
Chapter 4
Description
RSP in initializing or failed state.
RSP is up and running.
RSP is normal.
LC in initializing or failed state.
LC is up and running.
LC is normal.
Critical Alarm LED. A critical alarm has occurred.
No critical alarm has occurred.
Major alarm LED. A major alarm has occurred.
No major alarm has occurred.
Minor alarm LED. A minor alarm has occurred.
No minor alarm has occurred.
External USB is busy/active. The LED is driven by the
USB controller.
External USB is not busy/active.
Alarm Cutoff has been enabled. The ACO push button
was pressed after at least one alarm has occurred.
Alarm Cutoff is not enabled.
Note: ACO LED is not in use and will always be OFF.
Sync - Time core is synchronized to an external source
(either GPS or IEEE1588).
Not used.
Time core clock synchronization is either disabled OR
Time core is synchronized with external source
excluding GPS and IEEE1588
Refer Figure 4-1 for detailed description.
Refer Figure 4-1 for detailed description.
Troubleshooting the Installation
OL-26701-02