Cisco ASR 9001-S Hardware Installation Manual page 28

Site Requirement Guidelines
Figure 1-20
Figure 1-20
Figure 1-21
Warning To avoid shock hazard, be sure to apply shrink wrap tubing around the wire entry area of the terminal
block.
Hazardous voltage or energy may be present on power terminals. Always replace cover when
Warning
terminals are not in service. Be sure uninsulated conductors are not accessible when cover is in
place. Statement 1086
Only trained and qualified personnel should be allowed to install, replace, or service this equipment.
Warning
Statement 1030
Cisco ASR 9001 and Cisco ASR 9001-S Routers Hardware Installation Guide
1-18
shows the type of terminal block required for DC-input cable connections.
DC Power Cable Terminal Block
shows DC power source cable connections for single DC power module.
Chapter 1 Preparing for Installation
OL-26701-02