Cisco Asr 9001 Router Port Connection Guidelines - Cisco ASR 9001-S Hardware Installation Manual

Chapter 1 Preparing for Installation
•
These parts are not available from Cisco, but they are available from external commercial vendors.
Note

Cisco ASR 9001 Router Port Connection Guidelines

This section contains detailed cabling and signal information for all interface and port connections to the
RP. It also provides information for Ethernet routing and equipment.
Ports labeled Ethernet, SYNC, CONSOLE, and AUX are safety extra-low voltage (SELV) circuits. SELV
Caution
circuits should only be connected to other SELV circuits.
In Cisco ASR 9001-S Router, two 10 GE fixed SFP+ ports (SFP+2 and SFP+3) are disabled by default,
Note
and can be enabled by a license upgrade.
Figure 1-23
Figure 1-23
1 Service LAN and ToD ports
2
10MHz and 1PPS indicators
3 SYNC (BITS/J.211) ports
4 CONSOLE and AUX ports
5 Management LAN ports
Table 1-2
OL-26701-02
One grounding wire. Although we recommend at least six AWG multistrand copper wire, the wire
diameter and length depend on your router location and site environment.
shows all the port connections on the front panel of the Cisco ASR 9001 Router.
Cisco ASR 9001 Router Front Panel Ports
lists the Cisco ASR 9001 Router front panel ports description.
1 2 3 4 5
6 External USB port
7
Eight discrete LED indicators
8 CLUSTER ports
9 Fixed SFP+ ports
Cisco ASR 9001 and Cisco ASR 9001-S Routers Hardware Installation Guide
Cisco ASR 9001 Router Port Connection Guidelines
6 7 6 8 9
1-21