Configuring Lldp Interface-Level Command Options; Clearing Lldp-Related Information; Displaying Lldp-Related Information - Brocade Communications Systems Converged Enhanced Ethernet 8000 Administrator's Manual

9
LLDP configuration and management

Configuring LLDP interface-level command options

Only one LLDP profile can be assigned to an interface. If you do not use the lldp profile option at the
interface level, the global configuration is used on the interface. If there are no global configuration
values defined, the global default values are used.
To configure LLDP interface-level command options, perform the following steps from privileged
EXEC mode.
1. Enter the interface command to specify the CEE interface type and slot/port number.
2. Apply an LLDP profile to the interface.
3. Configure the FCoE priority bits for an interface. The value is specified as 0x0-0xff.
4. Configure the DCBX version for an interface for CEE. For detailed information on these version
5. Enter the copy command to save the running-config file to the startup-config file.

Clearing LLDP-related information

To clear LLDP-related information, perform the following steps from privileged EXEC mode.
1. Use the clear command to:

Displaying LLDP-related information

To display LLDP-related information, perform the following steps from EXEC or privileged EXEC
mode.
1. Use the show lldp neighbors command to:
98
DRAFT: BROCADE CONFIDENTIAL
switch(config)#interface tengigabitethernet 0/10
switch(conf-if-te-0/10)#lldp profile network_standard
switch(conf-if-te-0/10)#fcoe-priority-bits 6
command keywords, see
option is to automatically detect the DCBX version.
switch(conf-if-te-0/10)#lldp dcbx-version cee
switch(conf-if-te-0/10)#do copy running-config startup-config
•
Clear LLDP neighbor information.
switch#clear lldp neighbors tengigabitethernet 0/1
•
Clear LLDP statistics.
switch#clear lldp statistics tengigabitethernet 0/1
•
Clear all LLDP statistics.
switch#clear lldp statistics
•
Clear all LLDP neighbors.
switch#clear lldp neighbors
•
Display LLDP general information.
switch#show lldp
•
Display LLDP neighbor-related information.
"DCBX interaction with other vendor devices"
Converged Enhanced Ethernet Administrator's Guide
on page 91. The default
53-1002163-02