Archiving The Startup Configuration File; Restore An Archived Startup Configuration File; Flash File Management Commands; Debugging And Logging Commands - Brocade Communications Systems Converged Enhanced Ethernet 8000 Administrator's Manual

Archiving the startup configuration file

This tasks allows you to archive the startup configuration to an archive folder on an FTP site. To
archive the startup configuration, perform the following task from privileged EXEC mode.
Enter the copy command to archive the startup configuration file.

Restore an archived startup configuration file

To restore the startup configuration, perform the following task from privileged EXEC mode.
Enter the copy command to restore the startup configuration file.

Flash file management commands

Table 7
Ethernet Command Reference contains complete information on all available CLI commands.
NOTE
Use of the flash:// prefix is optional.
The tasks listed in
TABLE 7
Task
List the files in the Flash memory directory.
Delete a file from the Flash memory directory.
Erase all the files in the Flash memory directory.
NOTE: This command erases all the files in the
Rename a file in the Flash.
Display the contents of a file in the Flash memory
directory.

Debugging and logging commands

Table 8
Enhanced Ethernet Command Reference contains complete information on all available CLI
commands.
Converged Enhanced Ethernet Administrator's Guide
53-1002163-02
DRAFT: BROCADE CONFIDENTIAL
switch#copy startup-config
ftp://jsmith:password@10.24.48.51/archive/config_file]
switch#copy startup-config
ftp://jsmith:password@10.24.48.51/archive/config_file]
describes the common tasks used to manage Flash files. The Converged Enhanced
Table 7 are performed from privileged EXEC mode.
CEE Flash memory file management commands
Flash directory except the default startup
configuration file which is programmed as
a manufacturing default.
describes the tasks related to debugging and logging commands. The Converged
Flash file management commands
Command
switch#dir
switch#delete flash://example_filename
switch#erase flash
% Warning: Erasing flash filesystem will
remove all files in flash://.
Continue to erase?(y/n):y
switch#rename filename new_filename
switch#show file flash://example_filename
3
23