Supported Hardware And Software; What's New In This Document - Brocade Communications Systems Converged Enhanced Ethernet 8000 Administrator's Manual

•
•
•

Supported hardware and software

This document includes updated information specific to Fabric OS v7.0.0. The following hardware
platforms are supported in this release of the CEE Administrator's Guide:
•
The following blades are supported by this release of the CEE Administrator's Guide:
•
Within this manual, any appearance of the term "Brocade FCoE hardware" is referring to:
•
•
Although many different software and hardware configurations are tested and supported by
Brocade Communications Systems, Inc. for Fabric OS v7.0.0, documenting all possible
configurations and scenarios is beyond the scope of this document.
To obtain information about an OS version other than Fabric OS v7.0.0, refer to the documentation
specific to that OS version.

What's new in this document

This document has been updated for Fabric OS v7.0.0.
The following information was added:
•
•
For further information about new features and documentation updates for this release, refer to
the release notes.
xviii
DRAFT: BROCADE CONFIDENTIAL
Chapter 12, "Configuring 802.1x Port
Port Authentication protocol.
Chapter 13, "Configuring IGMP,"
FCoE hardware.
Chapter 14, "Configuring RMON,"
Brocade 8000
Brocade FCOE10-24 blade
Brocade 8000
Brocade FCOE10-24 port blade
New chapter on Internet Group Management Protocol,
New appendix on replacing the Brocade 8000,
Authentication,"describes how to configure the 802.1x
describes how to configure IGMP snooping on the Brocade
describes how to configure remote monitoring (RMON).
Chapter 13, "Configuring
Appendix A, "Brocade 8000
Converged Enhanced Ethernet Administrator's Guide
IGMP".
Replacement".
53-1002163-02