Managing The Current Configuration Transaction; Cleaning Up Login Groups And Vn_Port Mappings; Displaying The Fcoe Login Configuration - Brocade Communications Systems Converged Enhanced Ethernet 8000 Administrator's Manual

Managing the current configuration transaction

NOTE
The configuration changes created using the fcoelogingroup command are kept in a transaction
buffer until you save the buffer using the fabric-wide fcoelogincfg--save command. The login
configuration is saved as a transaction, and to apply it you need to specifically save it.
Perform one of the following tasks to either display or abort the current configuration transaction.
Task
Display the current configuration transaction.
Abort the current configuration transaction.

Cleaning up login groups and VN_port mappings

Perform the following tasks to clean up login groups and VN_port mappings.
Task
Perform a cleanup of all conflicting login groups
and VN_port mappings from the effective
configuration. This purges not only the conflicting
login groups but also the non-existing switches.
Perform a cleanup of all conflicting login groups
and conflicting VN_port mappings from the
effective configuration.
Perform a cleanup of all login groups for
non-existing switches from the effective
configuration.

Displaying the FCoE login configuration

Perform the following tasks to display the FCoE login configuration.
Task
Display the FCoE login configuration. Syntax is as
follows:
•
•
•
Display the status of the last configuration merge
during the last fabric merge. This operand also
displays conflicting login groups and login groups
for non-existing switches.
Converged Enhanced Ethernet Administrator's Guide
53-1002163-02
DRAFT: BROCADE CONFIDENTIAL
-switch swwn—Displays all of the login
groups for the specified switch.
-logingroup lgname—Displays the login group
configuration for the specified login group.
-saved—Displays only the effective
configuration.
Configuring the FCoE login information
Command
switch:admin> fcoelogincfg --transshow
switch:admin> fcoelogincfg --transabort
Command
switch:admin> fcoelogincfg --purge -conflicting
-nonexisting
switch:admin> fcoelogincfg --purge -conflicting
switch:admin> fcoelogincfg --purge -nonexisting
Command
switch:admin> fcoelogincfg --show [-switch swwn |
-logingroup lgname] [-saved]
switch:admin> fcoelogincfg --show [-mergestatus]
4
27