Configuring Rmon; In This Chapter; Rmon Overview; Rmon Configuration And Management - Brocade Communications Systems Converged Enhanced Ethernet 8000 Administrator's Manual

Configuring RMON

In this chapter

RMON overview

Remote monitoring (RMON) is an Internet Engineering Task Force (IETF) standard monitoring
specification that allows various network agents and console systems to exchange network
monitoring data. The RMON specification defines a set of statistics and functions that can be
exchanged between RMON-compliant console managers and network probes. As such, RMON
provides you with comprehensive network-fault diagnosis, planning, and performance-tuning
information.

RMON configuration and management

Alarms and events are configurable RMON parameters:
•
•

Default RMON configuration

By default, no RMON alarms and events are configured and RMON collection statistics are not
enabled.

Configuring RMON group statistics collection

You can collect RMON group statistics on an interface. RMON alarms and events must be
configured for you to display collection statistics. By default, RMON group statistics are not
enabled. The statistics are measured by the probe for each monitored interface on the switch.
These statistics include, but aren't limited to the following items:
•
•
Converged Enhanced Ethernet Administrator's Guide
53-1002163-02
DRAFT: BROCADE CONFIDENTIAL
•
RMON overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 131
•
RMON configuration and management . . . . . . . . . . . . . . . . . . . . . . . . . . . . 131
Alarms—Monitors a specific management information base (MIB) object for a specified
interval, triggers an alarm at a specified value (rising threshold), and resets the alarm at
another value (falling threshold). Alarms can be used with events; the alarm triggers an event,
which can generate a log entry or an SNMP trap.
Events—Determines the action to take when an event is triggered by an alarm. The action can
be to generate a log entry, an SNMP trap, or both.
Packets dropped and sent
Bytes sent (octets)
Chapter
14
131