Symbios Configuration Utility; Running The Symbios Configuration Utility - NEC HV8600 User Manual

Symbios Configuration Utility

The Symbios Configuration Utility detects the SCSI host adapter located on the
system board. Use the utility to:
S
Change adapter and SCSI device default values
S
Check and/or change SCSI device settings that may conflict with those of
other devices in the server.
S
Perform low-level formatting or verify operations on SCSI disk drives.

Running the Symbios Configuration Utility

1. Power-on the system. The system boots up.
2. When this message appears on the video monitor:
Press Ctrl-C to start the Symbios Configuration Utility
Press Ctrl+C to run this utility.
3. The utility starts and the Main Menu displays.
Port
Adapter Number
SYM53C895 4000
Change Adapter Status – Press ENTER to Enable/Disable on next boot.
Adapter Boot Order – Not used.
Additional Adapter Configuration – Not used.
Display Mode-Verbose – Press ENTER to change display mode.
Mono/Color – Press ENTER to change display from black/white to color.
Language – Not used.
Help
Quit
The following keys are active for all SCSI Configuration screens:
Key
Arrows
ENTER
ESC
Symbios Configuration Utility Main Menu
IRQ Level
11
Action
Up and down arrows move from one parameter to another within a
screen.
Displays options for a configurable parameter. Selects an option.
Moves back to previous screen or parameter or EXIT if at the Main
menu.
Status
Current Next Boot
On On
Configuring Your System 3-13
NVRAM
Found
Yes