NEC HV8600 User Manual page 24

B C
Q
R
R
A
Hot Plug PCI
slots
B
PCI slots
C
PCI slots
D Printer
E
Monitor
F
External-SCSI
G USB
H
Keyboard
I
Function select
switches
J Reset button
K Mouse
L
COM1
M
COM2
1-10 System Overview
Four Hot Plug PCI add-in board slot locations (PCI #21, PCI #22, PCI #23, and
PCI #24). Hot Plug PCI slot functionality depends on the type of operating
system support. Please note that without PCI Hot Plug operating system
support you cannot replace PCI boards while the server is powered on.
Three PCI add-in board slot locations (PCI #11, PCI #12, and PCI #13).
Four 64-bit add-in board slot locations (PCI #31, PCI #32, PCI #33, and PCI
#34).
LPT1 25-pin parallel port connector.
VGA monitor 15-pin connector.
Narrow-SCSI 50-pin connector.
USB Interface connector. Appropriate driver is required.
PS/2-compatible 6-pin mini-DIN connector.
See Configuring Switch and Jumper Settings in Chapter 4 of this User's Guide.
Press to reset system or execute a memory dump. The reset function and
dump function can be switched by setting the function select switches.
PS/2-compatible 6-pin mini-DIN connector.
COM1 serial port 9-pin connector.
COM2 serial port 9-pin connector.
A D E F G
L M G
N
R
R
S
H
I J
K
O
P