8. Using the four screws supplied with the drive, reinstall the side rails just
removed from the blank panel tray (see Figure 4-31, A). The rails for each
side of the device are identical.
Note:
Do not use the screws used to secure the blank
panel tray.
A
B
Figure 4-31. Attaching Side Rails to a Device
9. Engage the device side rails into the bay guide rails (see Figure 4-32).
Ensure that the device side rails (see Figure 4-33, A) are inside the bay guide
rails exactly as shown in Figure 4-33, B.
10. Push the drive into the bay until the screw holes of the side rails are directly
in front of the chassis screw holes and secure with the screws previously
removed.
C
A
Figure 4-32. Installing Device
Attaching side rails to
removable media drive
B
A Side rails
B Four drive mounting
screws
C Drive
Upgrading Your System 4-39