Power Supply; Installing A Power Supply - NEC HV8600 User Manual

Power Supply

The following sections provide procedures for installing a power supply,
removing a power supply, or swapping out a faulty power supply.

Installing a Power Supply

Use this procedure to install a power supply into your system.
1. Power off the system.
2. Slide the power supply into the chassis and tighten the thumbscrews (see
Figure
4-27, A) that secures the power supply.
3. Connect the power cord to the AC wall outlet and to the input receptacle on
the rear of the new power supply.
4. Power on the system.
A
Figure 4-27. Power Supply
Upgrading Your System 4-33