NEC HV8600 User Manual page 133

Table 5-1. POST Error Codes and Messages (continued)
Error Code and Message
0B59 Forced to use CPU#2 with
error
0B5A Forced to use CPU#3 with
error
0B5B Forced to use CPU#4 with
error
0B5C Forced to use CPU#5 with
error
0B5D Forced to use CPU#6 with
error
0B5E Forced to use CPU#7 with
error
0B5B\F Forced to use CPU#8 with
error
0B60 DIMM group #1 has been
disabled
0B61 DIMM group #2 has been
disabled
0B62 DIMM group #3 has been
disabled
0B63 DIMM group #4 has been
disabled
0B64 DIMM group #5 has been
disabled
0B65 DIMM group #6 has been
disabled
0B66 DIMM group #7 has been
disabled
0B67 DIMM group #8 has been
disabled
0B6F DIMM group with error is
enabled
0B70 The error occurred during
temperature sensor reading
Explanation
An error was detected in CPU#2.
An error was detected in CPU#3.
An error was detected in CPU#4.
An error was detected in CPU#5.
An error was detected in CPU#6.
An error was detected in CPU#7.
An error was detected in CPU#8.
A memory error was detected in
memory DIMM group #1. Memory
DIMM group #1 is disabled.
A memory error was detected in
memory DIMM group #2. Memory
DIMM group #2 is disabled.
A memory error was detected in
memory DIMM group #3. Memory
DIMM group #3 is disabled.
A memory error was detected in
memory DIMM group #4. Memory
DIMM group #4 is disabled.
A memory error was detected in
memory DIMM group #5. Memory
DIMM group #5 is disabled.
A memory error was detected in
memory DIMM group #6. Memory
DIMM group #6 is disabled.
A memory error was detected in
memory DIMM group #7. Memory
DIMM group #7 is disabled.
A memory error was detected in
memory DIMM group #8. Memory
DIMM group #8 is disabled.
Memory error was detected.
An error was detected in the
middle of detection of abnormal
temperature.
Action
Same as above.
Same as above.
Same as above.
Same as above.
Same as above.
Same as above.
Same as above.
Contact your service
representative.
Contact your service
representative.
Contact your service
representative.
Contact your service
representative.
Contact your service
representative.
Contact your service
representative.
Contact your service
representative.
Contact your service
representative.
The system is forcibly started
because errors are detected
in all memory devices.
Contact your service
representative.
Contact your service
representative.
Problem Solving 5-13