Rcu Configuration Settings - NEC LE2200 User Manual

3-6

RCU Configuration Settings

MAIN MENU
System Board
Mouse Controller
RS - 232 COMM Port 1
RS - 232 COMM Port 2
Parallel Port
IDE Controller
Floppy Controller
SLOT 1 - PCI Ethernet Controller
PCI Function 1
Embedded - PCI SCSI Controller
PCI Function 1
Embedded - PCI SCSI Controller
PCI Function 1
Embedded - PCI VGA Controller
PCI Function 1
Standard VGA Resources
Configuring Your System
Table 3-3 shows the RCU settings for a sample system
and provides a place for you to record any changes you
make to the settings. To display the configuration
settings, select Step 3 under the Resource Configuration
Utility Menu. To edit any of the configuration
parameters, use the up and down arrows to highlight
the desired configuration parameter and press ENTER.
Pressing F6 at this point, allows you to edit any of the
parameters resources (IRQs, DMAs, I/O ports or
memory).
Table 3-3. RCU Configurations
NORMAL SETTING
Enabled
PORT 3F8h - 3FFh IRQ 4
PORT 2F8h - 2FFh IRQ 3
PORT 378h - 37Fh IRQ 7
Enabled
Enabled
Enabled
Enabled
Enabled
Enabled
Enabled
YOUR CONFIGURATION